Bad mass air flow sensor symptoms mustang cleaning ford

MAF sensor problems on Fords have been cleaning it. Now, the symptoms that accompany a dirty (contaminated) Ford MAF sensor are not that harsh or noticeable on engine performance (of course this is not an absolute truth).

Cleaning a Ford mass air flow sensor. This procedure should work on most Ranger Mustang Taurus F1etc.

First off you may be asking, what is a MAF? The MAF stands for Mass Airflow Sensor. The MAF is the sensor that tells the ECM (engine computer) how much air is entering the engine at any give time.

The stock ford MAF for the engines was calibrated to work with the 19lb/hr injector.

Part -How to Test the Ford Mass Air Flow (MAF) Sensor

My Mass Air Flow sensor and the car was stalling all the time.Once we disconnected it, everything started to work fine again.

Mass airflow sensor problems can cause a variety of symptoms from the annoying to the must repair. We'll discuss these in-depth on this page.

Cleaning the sensor might hold off problems for a while, but the MAF sensor should be replaced. This is due to the fact that cleaning the wire isn't a thorough enough solution.

FYI for anyone who has a KN air filter in their car and eventually experiences what seems to be fuel injection problems, hesitation, a mystery transmission problem, acceleration bucking, etc.After years trying to diagnose my problem in my 20Grand Am, it came down to this.

Part -How to Clean the Ford Mass Air Flow Sensor

The first product specifically developed to clean mass air flow sensors. Designed with advanced Cozol® technology.